Maintenance > 42
M
AINTENANCE
R
EPLACING
THE
RIBBON
CARTRIDGE
When the printer image becomes faint or incomplete, replace the ribbon cartridge.
1. Make sure the printer is turned OFF.
2. Centre the printhead (1).
3. Remove and discard the used ribbon cartridge in accordance with your local
guidelines.
CAUTION!
Only use genuine original consumables to ensure the best quality
and performance from your hardware. Non original products may
damage your printer’s performance and invalidate your warranty.
WARNING!
Do not change the ribbon cartridge with the power switch set to
ON.
CAUTION!
The printhead may be HOT!
1
To Next Page
Loading...
