Oki ML3320 User Manual

Specifications > 53
S PECIFICATIONS
Specifications subject to change without notice.
MODEL MODEL NUMBER
ML3320ECO D22800B
ML3321ECO D22810B
ML3390ECO D22820B
ML3391ECO D22830B
ITEM SPECIFICATION
Print Method Impact dot matrix
Printhead
ML3320ECO/ML3321ECO
ML3390ECO/ML3391ECO
9 pins, 0.34 mm diameter, thermal protection
24 pins, 0.20 mm diameter, thermal protection
Dimensions (W x D x H)
(Without platen knob,
acoustic cover and paper
separator)
ML3320ECO/ML3390ECO
ML3321ECO/ML3391ECO
398 x 345 x 116 mm
552 x 345 x 116 mm
Weight
ML3320ECO/ML3390ECO
ML3321ECO
ML3391ECO
5.8 kg
7.6 kg
7.7 kg
Power Rating
Voltage
Frequency
220 - 240V
± 10%
50/60 Hz
± 2%
Power Consumption
(Without options attached)
ML3320ECO/ML3321ECO
Operation
Powersave mode
ML3390ECO/ML3391ECO
Operation
Powersave mode
Typ. 36W (ISO/IEC10561/Letter/Draft/Range 1)
Max. 2.0W
Typ. 35W (ISO/IEC10561/Letter/Draft/Range 1)
Max. 2.0W
Environmental Requirements Operating Temperature: 5 to 35C
Storage Temperature: -10 to +50C
Operating Humidity: 20 to 80%RH (max. wet bulb temp. 30C)
Storage Humidity: 5 to 95%RH (max. wet bulb temp. 40C)
Noise Level The acoustic noise of this product is less than 57dB(A) as
measured in accordance with EN ISO7779

Oki ML3320 Specifications

General

Print Technology	Dot Matrix
Interface	Parallel, USB
Emulations	Epson FX, IBM ProPrinter
Resolution	240 x 216 dpi
Print Speed	435 cps
Noise Level	57 dB
Number of Pins	9-pin