Oki ML3320 User Manual

Troubleshooting > 52
Continuous-form paper
is sticking to the paper
separator.
In cold dry weather, static charges can build up and
make the paper cling to the paper separator. Try
moving the paper guides together so that the paper
rests on the guides rather than on the separator.
Ink smears on paper. This may be caused by excessive printhead travel
from the centring position when printing narrow
columns. Set Centring Position to MODE 1. On
ML3321ECO/ML3391ECO also try MODE 2.
PROBLEM SOLUTION

Oki ML3320 Specifications

General

Print Technology	Dot Matrix
Interface	Parallel, USB
Emulations	Epson FX, IBM ProPrinter
Resolution	240 x 216 dpi
Print Speed	435 cps
Noise Level	57 dB
Number of Pins	9-pin