Maintenance > 44
C
LEANING
YOUR
PRINTER
To keep your printer in good operating condition, you are advised to clean it regularly.
P
RINTER
EXTERIOR
Clean the exterior of the printer as required, but at least every six months or 300 hours of
operation, whichever comes first.
> Moisten a piece of cotton cloth with diluted neutral detergent and carefully wipe the
printer exterior.
C
LEANING
THE
HOUSING
You should clean the printer every six months (or after about 300 hours of operation),
whichever comes first.
1. Turn the printer off, and remove any paper from the path.
2. Open the access cover, remove the pull-up roller assembly.
WARNING!
Set the printer Power Switch to OFF and disconnect the power
cable from the printer before cleaning the printer.
CAUTION!
Keep the access cover closed to avoid the possibility of detergent
entering the printer.
WARNING!
As the print head becomes hot during printing, allow it to cool
before carrying out any cleaning inside the printer.
Do not use any flammable solvents for cleaning the printer to avoid
any risk of fire or electric shock.
NOTE
Never use solvents or strong detergents on the cabinet: they could damage
the housing.
To Next Page
Loading...
Need help?
General
