Oki ML5720 - Page 47

Operating instructions > 47
Front
Feed
(Push)
cont.
Page Length Select the length of a
continuous form.
279.4 mm (11”)
296.3 mm (11 2/3”)
304.8 mm (12”)
355.6 mm (14”)
431.8 mm (17”)
76.2 mm (3”)
82.6 mm (3.25”)
84.7 mm (10/3”)
88.9 mm (3.5”)
93.1 mm (11/3”)
101.6 mm (4”)
127.0 mm (5”)
139.7 mm (5.5”)
152.4 mm (6”)
177.8 mm (7”)
203.2 mm (8”)
215.9 mm (8.5”)
Initial Position Select the vertical print
position when printer is
turned on.
Print Position
Cut Position
Cut Position Adjust Select an adjustment
value for the position to
cut the end of a
continuous form.
-20 ~ -1
0
+1 ~ +20
-30 ~ -1
0
+1 ~ +30
TOF Adjust Select an adjustment
value for the reference
position in regard to the
TOF position of a
continuous form.
-20 ~ -1
0
+1 ~ +20
-30 ~ -1
0
+1 ~ +30
Continuous Paper
Top of Form
Select an adjustment
value for the reference
position in regard to the
Top of Form of a
continuous form.
2.12 mm (1/12”)
4.23 mm (2/12”)
6.35 mm (3/12”)
8.47 mm (4/12”)
10.58 mm (5/12”)
12.70 mm (6/12”)
14.82 mm (7/12”)
16.93 mm (8/12”)
19.05 mm (9/12”)
21.17 mm (10/12”)
23.28 mm (11/12”)
25.40 mm (12/12”)
27.52 mm (13/12”)
User Top of Form
LF Revise Adjust the line feed
amount.
-2
-1
0
+1
+2
Centering Position Select to limit printhead
travel when printing
narrow columns.
Select Mode1 for
ML5720 and ML5790.
Select Mode 1 or Mode 2
for ML5721 and ML5791.
Default
Mode 1
Mode 2
GROUP ITEM FUNCTION SETS
ML5720/ML5721 ML5790/ML5791