Oki ML5720 User Manual

Operating instructions > 48
Pull Line Spacing Select line feed pitch. 6 LPI
8 LPI
Skip Over
Perforation
Select whether to skip
over perforation or not.
(When a skip over
perforation command is
received, the received
command is given
priority.)
No
25.4 mm (1”)
Page width
(Displayed only for
ML5721/ML5791)
Change to 8” to print on
narrow paper.
345.44 mm (13.6”)
203.2 mm (8”)
Page Length Select the length of a
continuous form.
279.4 mm (11”)
296.3 mm (11 2/3”)
304.8 mm (12”)
355.6 mm (14”)
431.8 mm (17”)
76.2 mm (3”)
82.6 mm (3.25”)
84.7 mm (10/3”)
88.9 mm (3.5”)
93.1 mm (11/3”)
101.6 mm (4”)
127.0 mm (5”)
139.7 mm (5.5”)
152.4 mm (6”)
177.8 mm (7”)
203.2 mm (8”)
215.9 mm (8.5”)
LF Revise Adjust the line feed
amount.
-2
-1
0
+1
+2
-14 ~ -1
0
+1 ~ +14
Centering Position Select to limit printhead
travel when printing
narrow columns.
Select Mode1 for
ML5720/ML5790.
Select Mode 1 or Mode 2
for ML5721/ML5791.
Default
Mode 1
Mode 2
Cut Sheet
Top
Line Spacing Select line feed pitch. 6 LPI
8 LPI
Form Tear-Off
(Displayed when
connected to the
RPS)
When printer is idle (0.5,
1.0 or 2.0 sec), paper is
advanced from the
current print position to
the tear position. When
data is received, paper is
moved to its original
printing position.
Manual
0.5 sec
1.0 sec
2.0 sec
Page width
(Displayed only for
ML5721/ML5791)
Change to 8” to print on
narrow paper.
345.44 mm (13.6”)
203.2 mm (8”)
GROUP ITEM FUNCTION SETS
ML5720/ML5721 ML5790/ML5791

Oki ML5720 Specifications

General

Brand	Oki
Model	ML5720
Category	Printer
Language	English