Oki Pro8432WT User Manual

- 80 -
Other Error Messages
3
3. Troubleshooting
Error
code
Message
<ATTENTION>
indicator
Cause/Remedy
Power Off and Wait for a while
126:Condensing Error
Blinks A condensation has occurred inside a printer.
Turn the printer off and turn on again after
a while.
USB Hub Unsupported
Please detach it
Goes off A USB hub unsupported by a printer is
connected. Remove the hub.
nnn* Service Call
nnn: Error
Blinks A fatal error has occurred inside the device.
Write down the error code and contact your
dealer.
nnn* Power Off/On
nnn:Error
Blinks A fatal error has occurred in a printer.
Turn the power off/on. Contact your dealer if
the same error occurs again.
PDL Error Occurred Varies Indicating that it has been occured an
internal processing error into the PDL
emulation.
It's a clearable warning. User should press
ENTER button for clearing the warning.
Expired saved les have been deleted
Press ONLINE Button
Lights up Indicates that an applicable job has been
automatically deleted as the retention period
for Private Job Print has expired.
Decode error occurred
Press ONLINE Button
Varies Indicates that an error has occurred during
analysis of image data input from an
external source.
This appears when an error has occurred
during analysis of TIFF or JPEG data in
USBMemoryPrint, DirectPrint, E-mailPrint
mode.
Can not read the le
Press ONLINE Button
Varies Indicates that the USB memory is
disconnected while PrintFromUSBMemory
is running. Reading of the image le is
cancelled.
Color toner empty. Job cancelled
Press ONLINE Button
Varies Noties the user that the color toner is
empty and that the received color data job
is cancelled.
E-mail receiving has been cancelled
Press ONLINE Button
Lights up Indicates that Email receiving has been
canceled.
It has the following possibilities.
- The format of email that has received is
illegal or not supported.
- The attached le is illegal or not
supported.
- The attached le that has received is too
large, for example, le size exceeds 8MB.
- Network connection has disconnected.
Invalid Data
Press ONLINE Button
Varies
Invalid data was received. Press the On-line
switch and eliminate the warning. Displayed
when unsupported PDL command is received or
a spool command is received without SD Card.
Job Type restricted
Job rejected
Press ONLINE Button
Varies A job of a JobLimitation setting violation is
received, and when discarding the job, it's
indicated.
Please change SD Memory Card Lights up Indicates that machine requests a user to
exchange old SD card device for new one
because the SD card device is life.
415
417
Replace Toner
%COLOR% Waste Toner Full
Please see HELP for details
Blinks Indicates that a waste toner box represented
by %COLOR% has become full and needs to
be replaced.
Error 415 : Magenta
Error 417 : White

Oki Pro8432WT Specifications

General

Brand	Oki
Model	Pro8432WT
Category	Printer
Language	English