Oki Teriostar LP-1040 Series - Page 101

101
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
System Menu
z
E-mail Scan Data Settings
MF
Sets the parameters regarding e-mailing of scan data.
Note

To use e-mailing of scan data, the user authentication parameter
Submission Authentication must be set to On, and an e-mail address must
be set in User Information under user registration.
y
SMTP Address
Sets the address of the SMTP server.
<Parameter by entering characters>
Up to 255 characters
y
SMTP Port
Sets the SMTP port number.
<Parameter by entering numbers>
1 to 65535 Default value: 25
y
With SMTP Authentication
Sets whether or not to use the SMTP authentication function.
<Parameter by selecting options>
n
: Default value
On SMTP authentication function is used.
n
O SMTP authentication function is not used.
y
SMTP User Name
y
SMTP Password
Sets the user name and the password for the SMTP server when With SMTP
Authentication is set to On.
y
Maximum E-mail Data Size
Sets the maximum size of the attached le.
<Parameter by selecting options>
n
: Default value
1 to 4096 Default value: 25 Unit: MB
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6