8181
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Restricting the Available Rolls
To simplify the Printer operation, you are recommended to restrict the roll paper
sizes required for operation. The following explains the procedure when you intend
to operate only with the A0 and A1 rolls.
(1) Set the paper size standards
Set the roll that you intend to use to On in Paper Size Standards (
&
page 105).
Set the rolls that you will not use to O.
For example, if you want to operate only with the A0 and A1 rolls:
A0 Roll = On
A1 Roll = On
A2 Roll = O
A3 Roll = O
Set as above.
(2) No paper or paper runs out
If paper runs out while the Printer is printing, a message prompting paper setting
may be displayed on the operation panel. However, prompts are not displayed for
rolls set to O in Paper Size Standards.
(3) Optimal mode
When Paper Supply Mode is set to Optimal (
&
page 120), the Printer automatically
selects the roll to produce the least wasted paper among the rolls set to On in Paper
Size Standards. are available. When the roll that will produce the least wasted
paper is not set in the Printer, a message prompting paper setting is displayed on
the operation panel.
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6
To Next Page
Loading...
