Oki Teriostar LP-1040 Series - Job Operations

7272
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Job Operation
The Printer identies each received data and scanned data as a job, which means
they are the equivalent of the les used for data transmission. On the Printer's job
operation, a job is equal to a le.
However, a drawing is not always equal to a job, as sometimes one job is comprised
of two drawings or more.
Through the operation panel or the Web functions (
&
pa ge 74), the job
operation enables you to check a print job status, change a print job order, and
reprint a completed job.
Job N
Job N
Job N-1
Job N-n
Job M
Job M-1
Job M-n
Job L
Job L-1
Job L-n
Job (Data) Received
Enable canceling
Deleted in Sequence
Printing
Enable canceling
Enable to be moved to
the front of waiting
Enable reprinting
(moved to the front of waiting)
Waiting JobsCompleted Jobs
Jobs Under Processing
TIP

To be able to display and manipulate completed jobs, Save/Delete
Complete Job in the system settings must be set to Save.
This parameter is set to Delete by default.
See
&
page 108 for more details.
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6