Oki Teriostar LP-1040 Series - Format Parameters (Only with HP-GL and D-SCAN)

136
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
Setup Items in PDL Settings Menu

Format Parameters (only with HP-GL and D-SCAN)
Format parameters specify the analysis conditions in the HP-GL format and D-SCAN
format.
Select this setting to:
- Use the LP-1040's printer driver;
- Operate without the touchpanel setting; and
- Print on a user dened series roll.
The user-dened roll width is specied with:
- The printer driver setting; or
- The touchpanel setting
When you intend to specify a user-dened roll width with the printer driver setting,
set the parameter to User Dened.
However, in spite of selecting User Dened, the user-dened roll width with touchpanel
setting is valid when the Printer receives data from the other printer drivers.
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6