Oki Teriostar LP-1040 Series - T System Menu

94
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
System Menu
y
Subnet Mask
Sets the subnet mask of the printer's network.
<Parameter by entering numbers>
0.0.0.0 to 255.255.255.255 Default value: 255.255.255.0
y
DNS Server 1 (IPv4/IPv6)
y
DNS Server 2 (IPv4/IPv6)
Sets the DNS server addresses (IPv4/IPv6). The DNS Server 1 is prioritized over the
DNS Server 2.
z
This setting is not required when, at the submission function, the destination is
specied with an IP address.
<Parameter by entering characters in IPv4/IPv6 format>
0 to 63 characters
y
Host Name
Sets the Printer’s host name.
<Parameter by entering characters>
0 to 15 characters
y
Windows Domain
Sets the Windows domain name of the Printer.
<Parameter by entering characters>
0 to 15 characters
y
Connection Speed
Sets the communication speed.
<Parameter by selecting options>
n
: Default value
n
Auto Automatically recognizes 1000BASE-T, 100BASE-TX, or
10BASE-T.
1000 Sets to 1000BASE-T.
100 Sets to 100BASE-TX.
10 Sets to 10BASE-T.
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6