Oki Teriostar LP-1040 Series - Page 95

95
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
System Menu
y
Connection Type
Sets the communication method.
<Parameter by selecting options>
n
: Default value
n
Auto
Full
Half
y
HTTP Port Address
Sets the HTTP port for the Web function.
<Parameter by entering numbers>
0 to 65535 Default value: 80
y
SNMP
Sets the SNMP operation. When the setting is On, SNMP is enabled. Note that the
SNMP community name can be set via the Web.
<Parameter by selecting options>
n
: Default value
O
n
On
y
SNMP Community
The SNMP community name can be set.
The default name is public.
Up to 63 characters can be used for this setting.
y
SNMP Version
Sets the version of the SNMP to use.
<Parameter by selecting options>
n
: Default value
Version 1
n
Version 2
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6