4646
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Replacing the Roll Paper
This section describes the removal and installation procedures at the roll paper
replacement.
When the roll paper is running out, the roll paper icon on the screen changes as
follows.
When the icon above is displayed, the Printer can output approximately 50 m
(1968.50 inches) of printout. So get ready to replace the paper roll with a new one.
When the roll paper is used up, an error lamp lights up, and the following is
displayed on the screen.
When the prompt message to supply paper appears, you can cancel the
one page of the job waiting for the paper. Apply this function when the
required paper is not available any more.
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6
To Next Page
Loading...
