T
Operation Requirements
27
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Warning Regarding Low-temperature Environment
When the Printer is in a low-temperature environment, a low-temperature icon is
displayed on the screen.
When this icon is displayed, modify the ambient temperature so that it is within the
recommended temperature range of 20°C to 30°C.
Note
This may cause the scanning speed to become slower or the data processing
time to become longer.
Do not install in the following locations.
A location exposed to direct sunlight or a bright location, such as
next to a window
A location exposed to vibration
A location exposed to a large amount of dust
A location prone to sharp changes in temperature or humidity
A location near a heater
A location that may be exposed to water
A location exposed to wind, such as from a ventilator outlet
A location exposed to a signicant amount of ammonia gas, such as
from a diazo copying machine
A location with poor ventilation
Ensure Good Ventilation
If the Printer is used for a long time in a room with poor ventilation or to print a
large number of copies, gases such as ozone may emit an unpleasant odor, and
reduce the comfort of the oce environment. Also, chemical substances may be
emitted during printing operations. Ensure enough ventilation and air circulation
for safe use of the Printer.
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6
To Next Page
Loading...
