Oki Teriostar LP-1040 Series - PDC (Print Data Converter) Parameters

147
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
Setup Items in PDL Settings Menu

PDC (Print Data Converter) Parameters
The Print Data Converter function converts print images into TIFF or PDF les when
the images are printed with the Printer, and then saves them in the Printer's PDC
box or a shared folder on a computer.
Up to 1000 les can be saved in the PDC box, which has a capacity of 39 GB. When
this number is exceeded, les are deleted from the oldest. Files are also deleted
when the PDC box retention period expires.
Files stored in the PDC box can be accessed using the WEB functions or
TerioStation2 (exclusive application).
n
PDC Parameters
This parameter sets the PDC function.
<Parameter by selecting options>
n
: Default value
n
O Print Data Converter is not performed. Printing only.
Print + image conversion Print Data Converter is performed. Print images are
converted into TIFF les and stored in the PDC box when
printed.
Image conversion Print Data Converter is performed.
Print images are converted into TIFF or PDF les and stored
in the PDC box or a shared folder without being printed.
n
File Save Destination
Specify the save destination of TIFF and PDF les created by Print Data Converter.
<Parameter by selecting options>
n
: Default value
n
PDC Box Save to the PDC box in the hard disk drive of the printer.
Files stored in the PDC box can be accessed using the
WEB functions or TerioStation2 (exclusive application).
DestFolder for Submission Save to a folder dened as a destination folder for
submission preset on the computer.
Note

For presetting of submission destinations, see
&
page 157.
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6