80
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
(4) Set the roll
Set the user dened series roll into the roll paper drawer. For the roll paper setting
method, see page 46.
(5) Set the paper menu
Set Size Standard to User Dened series for the roll paper drawer in which you
set the roll (
&
page 87).
(6) Set up the PDL
In the PDL setup for the data transmission port, set Size of Automatically Supplied
Paper to User Dened (
&
page 120).
Also, when performing user dened operations with the printer driver, set Printer
Drive to User Dened (
&
page 137).
(7) Unexpected operation
If the user dened series does not operate as expected, Again check the settings (1)
to (6).
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6
To Next Page
Loading...
