115
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
Ports Settings Menu
n
D-SCAN
<Parameter by selecting options>
n
: Default value
O The port does not accept D-SCAN format command.
n
On The port accepts D-SCAN format command.
n
TIFF
<Parameter by selecting options>
n
: Default value
O The port does not accept TIFF format command.
n
On The port accepts TIFF format command.
n
CALS
<Parameter by selecting options>
n
: Default value
O The port does not accept CALS format command.
n
On The port accepts CALS format command.
n
XPT Port
Sets the XPT port number (value).
<Parameter by entering numbers>
0 to 65535 Default value: 91xx xx: Port number
z
Do not use the same port number in multiple ports.
z
Do not use 0 to 1023, because they are reserved numbers.
n
Printer Name
Sets the LPD Printer name (text).
<Parameter by entering characters>
1 to 15 characters Default value: LPxx xx: Port number
z
The available characters are A to Z, 0 to 9, - (hyphen), and _ (underscore).
z
Case is not distinguished.
z
Do not use the same Printer name in multiple ports.
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6
To Next Page
Loading...
