Oki Teriostar LP-1040 Series - Page 211

211
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
User authentication

No Authentication Print Job Settings (Disabling Authentication for Ports)
You can set whether or not to disable authentication for each logical port of the
Printer.
1
Press MENU.
2
Press User Authentication Settings.
3
Press No Auth. Print Job Setting
4
Press the >> button to display the
second page.
Set Auth. Not Required for each port for which
you do not want to use authentication.
You can set Operation with No Auth. Port for
each port that does not use authentication as
follows.
- Print immediately
- Store in the Printer
If you select Print immediately, the print data
received from the corresponding port will be
printed immediately without being stored in the
Printer.
See
&
page 212 for the printer operation
when you select Store in the Printer.
Before Use Basic Operations Menu Functions
Print Job Box
Function
Authentication
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5
6