EasyManua.ls Logo

Oki Teriostar LP-1040 Series - Page 247

Oki Teriostar LP-1040 Series
290 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
247
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
Error Log Reference
(1) (2) (3) Message Meaning Action
W SP A100 Cannot Determine Data
Fomat
Format automatic identication failed Check the print data.
W SP A110 No PDL Choice(Port %d)
Not even 1 valid PDL at port %d Change the Printer's port settings,
and restart the Printer.
W SP C000 Spool Mng File Not Found
No spool management le
Previous shutdown may not have been
performed correctly
-
W SP C010 Spool Mng File Broken
Spool management le error -
W SP C020 Spool Data Restore Fail
Deleted the corresponding data item
because of spool data restore failure
-
W SP C030 Unknown File Removed
Deleted unknown les not matching the
management data in the spool partition
-
W SP C100 Spool Data Removed - Job
Unmatch
Deleted the spool data not compatible with the
job list
-
W SP C200 Spool area overow XX
Entered the spool area overow status
XX: Area number
-
W SP C210 Recover spool overowl XX
Recovered from the spool area overow status
XX: Area number
-
W TW 4000 Twain : error taskIF
Fatal error occurred during communication
initialization between tasks
Contact your nearest service
representative.
W TW 6000 Twain : warn setup
Cannot read the setup correctly Restart the Printer.
W TW 8300 Twain : use socket
Socket general error
W TW 8301 Twain : proc socket
Socket process error
W TW 8302 Twain : undene command
Socket command error
W TW 8303 Twain : read socket
Socket read error
W TW 8304 Twain : write socket
Socket write error
W TW 8320 Twain : broken pipe
Network error • Check the communication status
with the ping command.
• Check the network cable
connection and disconnection.
• Check that the computer power is
on.
• Check that the router/switch power
is on.
• Check the Printer's network
settings.
• Check the computer's network
settings.
• Check the other network settings.
If the error persists, replace the ARC
substrate.
W TW 8331 Twain : addr not avail
Network error
W TW 8333 Twain : net unreach
Network error
W TW 8336 Twain : connect reset
W TW 8337 Twain : no buer
W TW 8339 Twain : not connect
W TW 8341 Twain : host unreach
W TW 8343 Twain : host down
W TW 833C Twain : time out
W TW 833D Twain : connect refused
W TW 83FF Twain : others (net)
Network errors other than above
(1) Type (2) Character string (3) Error number
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6

Table of Contents

Other manuals for Oki Teriostar LP-1040 Series

Related product manuals