Oki Teriostar LP-1040 Series - Printer Basic Specifications

To Next Page

To Previous Page

254

LP-1040/LP-1040-MF User's Manual for Basic Printer Operation

Basic Specications



Printer Specications

Item

Specication/Function

LP-1040 LP-1040-MF

Printing system Electrophotographic technology (LED exposure)

Developing system Single-component type dry developing

Photoconductor type OPC

Fuser system Heat rollers

Resolution 600 dpi

Feed mechanism, output

direction

2-stage 2-roll, front feed and front output

Paper type Plain paper, recycled paper, tracing paper, matte lm

Maximum print length 10 m (32 feet)

Paper size Roll paper (width) A0/A1/A2/A3, 36"/24"/18"/12"

Warming up time 240 seconds or less

First printing A0 printing within 30 seconds

Guaranteed print area (roll

paper only)

Full area excluding blank spaces below:

- 5 mm on front end

- 5 mm on rear end

- 5 mm on both sides

Data format D-SCAN, HP-GL, HP-GL/2, HPRTL, TIFF, CALS

HDD 500 GB

Interface Ethernet (10Base-T/100Base-Tx/1000Base-T)

Network protocol TCP/IP (ftp, lpr, xpt (socket))

(1/2)

Before Use Basic Operations Menu Functions

Authentication

Function

Print Job Box

Function

Troubleshooting Appendix

Chapter

Other manuals for Oki Teriostar LP-1040 Series