EasyManua.ls Logo

Oki Teriostar LP-1040 Series - Page 286

Oki Teriostar LP-1040 Series
290 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
286
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
TIFF Tags
The meaning of the symbols in the table is as follows.
Yes: Indicates commands supported by the Printer.
Partially: Indicates the corresponding functions are partially supported by the Printer.
No: Indicates tags not supported by the Printer.
TIP
The tags supported by the Printer are equivalent to TIFF Revision 4.0.
When data larger than the spool buer size is received, an error message is
displayed on the panel. The data is disregarded.
If the Printer receives any non-supported tags, it ignores them.
Command
Function Supported
Name Hexadecimal
NewSubleType 00FE Species the type of image data. Partially
SubleType 00FF Species the type of image data. Partially
ImageWidth 0100 Species the number of pixels for each image line. Yes
ImageLength 0101 Species the number of image lines. Yes
BitsPerSample 0102 Species the number of bits for each sample. Yes
Compression 0103 Species the compression format. Yes
PhotometricInterpretation 0106 Species the interpretation method for the values in the bitmap. Yes
FillOrder 010A Species the format for storing pixel data in bytes. Yes
StripOsets 0111 Species the oset value for each strip. Yes
Orientation 0112
Species the position of the image origin point, the pixel
forward direction, and the line forward direction.
Yes
SamplesPerPixel 0115 Species the number of samples for each pixel. Yes
RowsPerStrip 0116 Species the number of lines before each strip is compressed. Yes
StripByteCounts 0117 Species the number of bytes after each strip is compressed. Yes
MinSampleValue 0118 Species the minimum sample value. Yes
MaxSampleValue 0119 Species the maximum sample value. Yes
XResolution 011A
Species the number of pixels in each resolution unit in the
line direction.
Yes
YResolution 011B
Species the number of pixels in each resolution unit in the
row direction.
Yes
PlanerCongration 011C Species the format for storing each pixel element. Yes
XPosition 011E Species the oset value for the image X direction. Yes
YPosition 011F Species the oset value for the image Y direction. Yes
T4Options 0124 Species the option information for T4 compression. Partially
ResolutionUnit 0128
Species the physical unit of resolution units in the X
Resolution and Y Resolution tags.
Yes
Color Map 0140 Species the palette color table (RGB). Yes
T
Command Lists
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6

Table of Contents

Other manuals for Oki Teriostar LP-1040 Series

Related product manuals