Oki Teriostar LP-1040 Series - Page 97

97
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T
System Menu
y
DHCPv6
Set the options when the Printer is installed in an environment with automatic IPv6
address distribution from the DHCP server.
<Parameter by selecting options>
n
: Default value
n
RA The IPv6 address is obtained automatically using RA
(router advertisement). This is the parameter generally
used.
On The IPv6 address is forcibly obtained from the DHCP
server.
O The IPv6 address is not automatically obtained from the
DHCP server.
z
Routing Table
Sets the routing table for the Printer. This is used when connecting the Printer with
a host on a dierent network.
y
Gateway Address 01 to 10
Sets the IP address of the router.
<Parameter by entering numbers>
0.0.0.0 to 255.255.255.255 Default value:
0.0.0.0 (not set)
y
Network Address 01 to 10
Sets the network address.
<Parameter by entering numbers>
0.0.0.0 to 255.255.255.255 Default value:
0.0.0.0 (not set)
z
The network address set to 0.0.0.0 species the default routing
Before Use Basic Operations Menu Functions
Authentication
Function
Print Job Box
Function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
5
4
6