d-Color MF 3300/3800 1-65
1.5 Available operations in Administrator mode
1
[SMB Settings] - [Direct Hosting Settings]
To display: Administrator mode - [Network] - [SMB Settings] - [Direct Hosting Settings]
Select whether or not to enable the direct hosting SMB service. If enabled, you can specify destination using
the IP address (IPv4 or IPv6) or host name.
[Enable] is specified by default.
[Web Service Settings] - [Common Settings]
To display: Administrator mode - [Network] - [Web Service Settings] - [Common Settings]
Register the WINS server when it is installed to resolve the name.
[Web Service Settings] - [Printer Settings]
To display: Administrator mode - [Network] - [Web Service Settings] - [Printer Settings]
Configure settings to perform Web service printing.
[Web Service Settings] - [Scanner Settings]
To display: Administrator mode - [Network] - [Web Service Settings] - [Scanner Settings]
Configure settings to perform Web service scanning.
Item Description
[Friendly Name] Enter the name of this machine to be displayed when this machine is searched
for using the Web service through a computer (using up to 127 bytes).
[Secure Mode] Select whether or not to use the SSL for Web service communication.
[Disable] is specified by default.
Item Description
[Print Function] Select whether or not to use the WS print function.
[Enable] is specified by default.
[Printer Name] Enter the name of this machine when using it as a WS printer (using up to 127
bytes, excluding !, \, and ,).
[Printer Location] If necessary, enter the installation location of the printer (using up to 127
bytes).
[Printer Information] If necessary, enter the printer information (using up to 127 bytes).
Item Description
[Scan Function] Select whether or not to use the WS scan transmission function.
[Enable] is specified by default.
[Scanner Name] Enter the name of this machine when using it as the WS scanner (using up to
127 bytes).
[Scanner Location] If necessary, enter the installation location of the scanner (using up to 127
bytes).
[Scanner Information] If necessary, enter the scanner information (using up to 127 bytes).
[Connection Timeout] Change the time-out time to limit a communication with the computer if nec-
essary.
[120] sec. is specified by default.
To Next Page
Loading...
Need help?
General
