Receiving pXX
The printer is receiving a fax. pXX represents the number of pages received. Wait for the message to clear.
Reload printed pages in Tray <x>
• Press to clear the message and continue processing the second side of the sheet.
• Press , and then press to cancel printing.
Remote Management Active
The printer is offline while it configures settings. Wait for the message to clear.
Remove originals from the scanner ADF
Remove the paper from the ADF to clear the message and continue printing.
Remove packaging material
Check for and remove any packaging materials from the toner cartridges.
Remove paper from standard output bin
Remove the stack of paper from the standard exit bin.
Replace <color> cartridge
Replace the toner cartridge, and then press to clear the message and continue printing.
Replace PC Kit
This is the early warning message for the photoconductor kit. The printer continues printing unless the value for the
Cartridge Alarm is changed from the printer control panel or set to On from the Supply Notifications Web page
(located on the Embedded Web Server).
If the setting is On, then the printer stops printing. Press
to select Continue and continue printing.
When the PC Kit Life Warning appears, order a new photoconductor kit.
Scan Document Too Long
The scan job exceeds the maximum number of pages. Press , and then press to cancel printing and clear the
message.
Scan to USB failed
An attempt to create a file on the USB drive failed.
Understanding printer messages
162
To Next Page
Loading...
Need help?
General
