Note: Once the printer software and any options are installed, it may be necessary to manually add the options in
the printer driver to make them available for print jobs. For more information, see “Updating available options in the
printer driver” on page 31.
Attaching cables
1 Connect the printer to a computer or a network.
• For a local connection, use a USB cable.
• For a network connection, use an Ethernet cable.
Notes:
• For fax connections, see “Initial fax setup” on page 82.
• Make sure the software is installed before turning the printer on. For more information, see the Setup
Guide.
2 Connect the power cord to the printer first and then to a wall outlet.
Additional printer setup
28
To Next Page
Loading...
Need help?
General
