Cleaning the scanner glass
Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images.
Note: Clean both areas of the scanner glass and both white underside areas.
1 Slightly dampen a soft, lint-free cloth or paper towel with water.
2 Open the scanner cover.
1 White underside ADF cover
2 White underside scanner glass cover
3 Scanner glass
4 ADF glass
3 Wipe the scanner glass until it is clean and dry.
4 Wipe the white underside of the scanner cover until it is clean and dry.
5 Close the scanner cover.
Moving the printer
Before moving the printer
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more
trained personnel to lift it safely.
CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or
printer damage:
• Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
• Disconnect all cords and cables from the printer before moving it.
Maintaining the printer
196
To Next Page
Loading...
Need help?
General
