1 Power cord socket
2
Ethernet port
3
USB port
Verifying printer setup
Once all hardware and software options are installed and the printer is turned on, verify that the printer is set up
correctly by printing the following:
• Menu settings page—Use this page to verify that all printer options are installed correctly. A list of installed
options appears toward the bottom of the page. If an option you installed is not listed, then it is not installed
correctly. Remove the option and install it again.
• Network setup page—If your printer is attached to a network, print a network setup page to verify the network
connection. This page also provides important information that aids network printing configuration.
Additional printer setup
29
To Next Page
Loading...
Need help?
General
