Menu item Description
Layout
Auto
Off
2 Up
3 Up
4 Up
6 Up
9 Up
12 Up
16 Up
Index Print
Determines the maximum number of images that can print on one side of paper
Notes:
• Auto is the factory default setting.
• If both the printer and the PictBridge-enabled camera have a value for this
setting, the value in the camera supersedes the value in the printer.
Quality
Normal
Draft
Fine
Determines which resolution, toner darkness, and color saver values the device uses
when printing photos sent from a PictBridge-enabled device
Notes:
• Normal is the factory default setting.
• If both the printer and the PictBridge-enabled camera have a value for this
setting, the value in the camera supersedes the value in the printer.
Paper Source
MP Feeder
Tray <x>
Manual Paper
Identifies the printer default input source when printing photos from a
PictBridge-enabled device
Notes:
• MP Feeder is the factory default setting.
• A photo size larger than the size of the media installed in the printer input
source cannot be selected.
Set Date and Time
Menu item Description
View Date/Time
Displays the time in YYYY-MM-DD HH:MM format
Note: This is a view only screen.
Set Date/Time
Yes
No
Instructs the printer to run the setup wizard
Notes:
• Yes is the factory default setting.
• After completing the setup wizard by selecting Done at the Country/Region
select screen, the default becomes No.
Understanding printer menus
154
To Next Page
Loading...
Need help?
General
