Olympus AL120-12 Series - Vacuum Stage Operation

Maintenance Manual Test Programs
3-9
Page
Test No./
Test Name
Function Outline
No. 4
A-arm
side-to-side
movement
check
<A-arm side-to-side movement check>
This program can be used to check the A-arm side-to-side movement.
Press the [Start] button.
If the loader has not been initialized, initialization starts.
①Right side (+4mm) ②Origin ③Left side ④OriginThe loader then repeats steps ① to ④.
・ Press the [Start] button to pause the operation at the break point.
・ When an error occurs, the loader displays the same error code as in the regular operation, and then
stops.
・ Press the [Quit] button, and the A-arm returns to its initial position and the loader stops the
operation.
Do not continue the operation for longer than 1 minutes.
Wait for longer than one minute before restarting the operation.
ＣＡＵＴＩＯＮ