176
SQ SETUP
You can select the file size and compression level for the SQ mode.
Set the Mode dial to P or
A/S/M.
Press the Menu button to
display the Menu.
Press the top/bottom arrows
on the Jog dial to select
MODE SETUP, then press the
right arrow to select SETUP
and press the OK button.
Press the top/bottom arrows
on the Jog dial to select SQ
SETUP.
Press the right arrow on the
Jog dial, then press the
top/bottom arrows to select
the setting.
Press the left arrow on the
Jog dial to confirm the setting.
Press the OK button to save
the setting. Press again to
cancel the Menu.
7
6
5
4
3
2
1
Note:
• The setting will remain until it is readjusted.
• See page 38 for the number of pixels and the number of storable
pictures.
1
73
6543
2