138
NOISE REDUCTION
6
Adjusting the image quality and exposure
1 In the top menu, select MODE
MENU → CAMERA → NOISE
REDUCTION → ON or OFF, and
press e.
g“How to use the menus” (P.49)
•Press e again to exit the menu.
• When noise reduction is set to ON, NR is
displayed on the control panel.
• When m mode is set, noise reduction is fixed to ON.
• When noise reduction is set to ON, the camera implements noise-
reducing processes after each shot. For this reason, shooting time
is approximately twice as long as usual. During this time, you
cannot continue shooting.
• When noise reduction is set to ON, sequential shooting (i,
j, k, 7) is not possible.
• This function may not work effectively with some shooting
conditions or subjects.
• As the shutter speed is relatively slow, the use of a tripod is
recommended.
Mode dial
Arrow pad
OK button
Note
To Next Page
Loading...
