155
Editing still pictures
7
Playback
Resizing
2 Select Q, then press d.
3 Turn the control dial to select the
still picture you want to edit, then
press e.
4 Press ac to select a resolution,
then press e.
• To quit the resizing function, select CANCEL, then press e.
5 Press ac to select the card, then press e.
• If only one card is inserted, skip this step.
• When there is insufficient card memory, the display returns to the
setting screen.
6 Press ac to select OK, then press e.
• The BUSY bar is displayed during resizing. After the image is saved,
the camera returns to Step 3.
• Resizing is not possible in the following cases.
Movies, pictures that have been edited on a PC, or when there is
insufficient memory space on the card.
• If the size of the selected picture is 640 × 480, you cannot select
640 × 480.
Trimming
2 Select P, then press d.
3 Turn the control dial to select the
still picture you want to edit, then
press e.
4 Press ac to select P, then
press e.
320*240
CANCEL
EXIt
GO
640*480
SELECt
Note
CANCEL
EXIt
GO
SELECt
To Next Page
Loading...
