157
Editing still pictures
7
Playback
RAW editing
2 Select RAW DATA EDIT, then press
d.
3 Turn the control dial to select the still
picture you want to edit, then press
e.
• You can only select an image recorded in
RAW mode.
4 Press ac to select the item you
want to set, then press d.
5 Press ac to select the desired
setting, then press e.
6 When all the necessary items have been set, press e.
7 Press ac to select the card, then press e.
• If only one card is inserted, skip this step.
• When there is insufficient card memory, the display returns to the
setting screen.
8 Press ac to select OK, then press e.
• The BUSY bar is displayed during editing. After the image is saved,
the camera returns to Step 3.
(Items that can be set by RAW editing
Function Settings Ref. Page
K TIFF, SHQ, HQ, SQ1, SQ2 P.120
WB AUTO, PRESET 1, PRESET 2,
CUSTOM, V
P.128
> RED7 to BLUE7 P.133
SCENE MODES NORMAL, I, L, m P.137
SHARPNESS ±5 P.134
CONTRAST ±5 P.135
SATURATION ±5 P.136
FUNCTION OFF, BLACK & WHITE, SEPIA P.116
P – P.155
HQ
To Next Page
Loading...
