162
8
Useful functions
8 Useful functions
ALL RESET – Saving the camera’s settings
This function lets you save the current camera settings after the power is
turned off. The settings affected by All Reset are listed on the next page.
The All Reset setting (ON/OFF) applies to all the modes. If All Reset is set in
one mode, this setting applies to all the other modes, both shooting and
playback.
ON All settings are returned to the factory default settings after the power
is turned off.
Ex. If the record mode is changed to SQ1 and All Reset is set to ON,
the record mode will return to HQ (factory default setting) next
time the camera is turned on.
OFF The settings made before the power is turned off are saved.
1 In the top menu, select MODE
MENU → SETUP → ALL RESET →
OFF or ON, and press e.
g“How to use the menus” (P.49)
•Press e again to exit the menu.
• My Mode settings and functions on the SETUP tab in the Mode
Menu (ALL RESET, W, 8, etc.) are not returned to the factory
default settings even when All Reset is set to ON.
Mode dial
Arrow pad
OK button
Note
To Next Page
Loading...
