192
PIXEL MAPPING – Checking the image processing functions
8
Useful functions
• When the File No. reaches 9999, the file number returns to 0001
and the folder number changes.
• When both the Folder and File No. reach their respective maximum
number (999/9999), the number of storable pictures becomes 0
even if the card is not full. No more pictures can be taken. Replace
the card with a new one.
The Pixel Mapping feature allows the camera to check and adjust the CCD
and image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait over a minute
after the monitor is used or continuous shots are taken to allow for proper
performance of the Pixel Mapping function.
1 In the top menu, select MODE
MENU → SETUP → PIXEL
MAPPING, and press d.
g“How to use the menus” (P.49)
• START appears.
2 Press e.
• The BUSY bar is displayed during Pixel
Mapping. When Pixel Mapping is finished,
the screen returns to the mode menu.
• If you accidentally turn the camera off during Pixel Mapping, start
again from Step 1.
Note
PIXEL MAPPING – Checking the image processing functions
Mode dial
Arrow pad
OK button
BUSY
Note
To Next Page
Loading...
