126
6
Adjusting the image quality and exposure
Exposure compensation
In some situations, you may get better results when the exposure that the
camera sets is compensated (adjusted) manually. You can adjust the
exposure by selecting the exposure compensation value. After adjusting the
exposure, you can check the picture on the monitor.
1 Turn the control dial while
holding down F.
• Adjust toward + Turn to the right to
adjust up to +2.0.
• Adjust toward - Turn to the left to
adjust up to -2.0.
• The exposure compensation can be
set in 1/3EV steps or 1/2EV steps.
g“Exposure steps – Selecting the
adjustment increments” (P.174)
• The exposure compensation value is
displayed on the control panel.
Mode dial
Control dial
F Exposure compensation
button
−2.0 0.0 +2.0
To Next Page
Loading...
