74
4
Flash
4 Flash
Flash shooting
Select the flash mode best suited to the light conditions and the effect you
want to achieve. You can also adjust the amount of light emitted using the
flash intensity control.
1
Set the flash mode by turning the
control dial while holding down
#
.
• The flash mode changes as follows
and the selected mode is displayed on
the control panel (Selectable flash
modes may differ depending on the
shooting mode.).
2 Press the shutter button halfway.
• The orange lamp and #mark light when
the flash is ready to fire.
Mode dial
Control dial
#Flash mode
button
Flash
mode
FLASH MODE
AUtO
No indication (Auto-flash)
!
(Red-eye reduction flash)
#
(Fill-in flash)
$
(Flash off)
#
SLOW or H SLOW
(Slow synchronization)
Monitor
#Mark
Orange lamp
Viewfinder
To Next Page
Loading...
