139
7
Playback
7 Playback
Viewing still pictures
1 Set the mode dial to q (playback
mode) and turn the camera on.
g“Turning the power on/off” (P.33)
• The last picture taken is displayed.
(Single-frame playback)
2 Use the arrow pad or control dial to play back other
pictures.
• Arrow pad
• Control dial
• If no operation is performed for about 3 minutes, the camera
automatically enters the sleep mode and the monitor turns off.
Press f or any button to turn the monitor on.
Mode dial
Arrow pad
Mode dial
Power switch
Control dial
Displays the next
picture.
Displays the previous
picture.
Jumps to the picture 10 frames back.
Jumps to the picture 10 frames ahead.
Displays the next
picture.
Displays the previous
picture.
Note
To Next Page
Loading...
