36
1
Getting started
Selecting a language for on-screen display
You can select a language for on-screen display. Available languages vary
depending on the area where you purchased this camera.
This reference manual shows the English on-screen display in the
illustrations and explanations.
1 Set the mode dial to P and turn the
camera on.
• You can select the language in all
modes.
2 Press e.
• The top menu is displayed.
3 Press d on the arrow pad to select
MODE MENU.
4 Press ac to select the SETUP
tab, then press d.
Arrow pad
OK button
Mode dial
Power switch
WB
DRIVE
MODE MENU
Top menu
CAMPIC
CARD
SEtUP
ALL RESEt
EV StEP
ON
To Next Page
Loading...
