85
External flash (optional)
4
Flash
Using a slave flash mode
This setting is for when using a commercially available slave flash that is
synchronized with the camera flash.The amount of light emitted by the flash
can be adjusted in 10 levels. The flash can fire in sequential shooting mode,
but the interval between shots will be longer if a high emission level is set.
AUTO, ! : The setting is automatically changed to
#
(Fill-in flash).
H SLOW : The setting is automatically changed to
#
SLOW1.
1 In the top menu, select MODE
MENU → CAMERA →
QFLASH →
SLAVE, and press d.
g“How to use the menus” (P.49)
2 Press ac to select an emission
level from 1 to 10, then press e.
3 Press e repeatedly until the menu goes off.
Mode dial
Arrow pad
OK button
To Next Page
Loading...
