Olympus CAMEDIA C-5060 Wide Zoom - If an Error Code Is Displayed

222
10
Direct printing
If an error code is displayed
If an error code appears on the camera’s monitor during direct print setting
or printing, see the following table.
For more details, refer to the printer’s instruction manual.
TIPS
• If an error code other than those shown above is displayed, refer to
“Error codes” (P.223).
Monitor indication Possible cause Corrective action
NO CONNECTION
The camera is not
connected to the printer
correctly.
Disconnect the camera
and connect it again
correctly.
NO PAPER
There is no paper in the
printer.
Load some paper in the
printer.
NO INK
The printer has run out of
ink.
Replace the ink cartridge
in the printer.
PRINT ERROR
There is a problem with
the printer and/or
camera.
Turn off the camera and
printer, then turn them on
again.
JAMMED
The paper is jammed. Remove the jammed
paper.