174
Exposure steps – Selecting the adjustment increments
8
Useful functions
3 Press e.
• The BUSY bar is displayed and the card
is formatted.
• Do not perform any of the following actions during formatting as
they may render the card unusable.
Open the card cover, remove the battery, connect or
disconnect the AC adapter (regardless of whether or not the
battery is loaded in the camera).
You can set adjustment of the exposure compensation and flash intensity in
1/3EV or 1/2EV. The exposure compensation, flash intensity, shutter speed
and aperture settings will differ depending on the adjustment range you
choose.
1 In the top menu, select MODE
MENU → SETUP → EV STEP →
1/3EV or 1/2EV, and press e.
g“How to use the menus” (P.49)
•Press e again to exit the menu.
BUSY
Note
Exposure steps – Selecting the adjustment increments
Mode dial
Arrow pad
OK button
To Next Page
Loading...
