149
Editing movies
7
Playback
4 Select the first frame of the index
with the arrow pad and press e.
a : Jumps to the first frame of the movie.
c : Jumps to the last frame of the movie.
d : Displays the next frame. The movie
can be played continuously by holding
the button down.
b : Displays the previous frame. The
movie can be played continuously in
reverse by holding the button down.
5 As in Step 4, select the last frame
of the index with the arrow pad and
press e.
6 Press ac to select the card, then press e.
• If only one card is inserted, skip this step.
• When there is insufficient card memory, the display returns to the
setting screen.
7 Press ac to select OK, then
press e.
• The camera returns to the playback
mode, then the 9 frames extracted from
the movie appear as an index display.
The index is stored as a new picture.
• If you want to select different frames,
select RESET and press e and repeat
the procedure from Step 4.
• To quit the index function, select CANCEL and press e.
OK
OK
GO
SELECt
OK
RESEt
INDEX
CANCEL
To Next Page
Loading...
