Miscellaneous
232
Troubleshooting
11
(When the camera is connected to a PC or Printer.
Possible cause Corrective action Ref. Page
The monitor is hard to see.
The brightness is not
adjusted properly.
Select s in the mode menu and adjust the
brightness.
P.181
The monitor is
exposed to direct
sunlight.
Position the monitor in the down position or block
the sunlight with your hand.
—
Possible cause Corrective action Ref. Page
The camera is not recognized by the PC.
The USB driver
cannot be installed
It is necessary to install the USB driver for
Windows 98/98SE. For how to install, see
“DIGITAL CAMERA-PC CONNECTION
OPERATION MANUAL” on the CD-ROM.
—
The power of the
camera has not been
turned on.
Turn the power switch to ON and turn on the
camera.
P.33
To Next Page
Loading...
