29
Inserting a card
1
Getting started
1 Make sure the power switch is set
to OFF.
2 Open the card cover.
3 Insert a card.
xD-Picture Card
• Insert the card into the slot with the contact area
toward you. Ensure the card is not inserted
diagonally.
• Insert the card as far as it will go until it clicks.
• If the card is inserted incorrectly oriented or it is
inserted at an angle, the contact area may be
damaged or the card may become jammed.
• If the card is not inserted fully, it may not be able to
record data.
Power switch
Card cover
Contact area
Notch
To Next Page
Loading...
