43
Direct buttons
2
Using the Buttons and Menus
• The setting screen is displayed on the
monitor.
• At the moment you release your finger
from the direct button, the flash mode
setting is made.
• If the operation guide is displayed at the bottom of the screen, you can
select further options.
2 Press e while holding down # to
display the menu.
Release the direct button after the
menu is displayed.
• The monitor jumps to the screen for
changing the mode menu settings.
3 Press ac to select an item, then press e.
•Press e again to exit the menu and return to shooting status.
FLASH MODE
AUtO
SEt
Operation guide
Monitor
CARDSEt PIC
CAMERA
DRIVE
ISO
MY MODE
FLASH
SLOW
SLOW2
SLOW
SLOW1
To Next Page
Loading...
