103
EN
Customizing your camera
8
Custom Menu 1
e
EXP /
e
/ ISO
EV STEP
You can select the EV step for exposure parameter setting, such as shutter speed, aperture
value, or exposure compensation value, from
[1/3 EV]
,
[1/2 EV]
, or
[1 EV]
.
ISO STEP
You can select the EV step of the ISO sensitivity from
[1/3 EV]
or
[1 EV]
.
ISO-AUTO SET
You can set the upper limit and default ISO values when ISO is set to
[AUTO].
[HIGH LIMIT]
This sets the upper limit of the ISO value that automatically changes. The upper limit
can be set from 100 to 3200 in 1/3 EV increments.
[DEFAULT]
This sets the value to be normally used when the optimum exposure can be obtained.
The value can be set from 100 to 3200 in 1/3 EV increments.
ISO-AUTO
You can set the shooting mode in which the ISO
[AUTO]
setting is activated.
[
P
/
A
/
S
]
In
P
/
A
/
S
mode, the
[AUTO]
setting is activated. When
[AUTO]
is set in other
shooting modes, ISO 100 is set.
[ALL]
The
[AUTO]
setting is activated for all shooting modes. The ISO is automatically
selected to obtain the optimal ISO even in
M
mode.
AEL Metering
You can set the metering mode when pressing the
AEL
/
AFL
button to lock the exposure.
•
[AUTO]
performs metering in the mode selected under
[METERING]
.
BULB TIMER
You can select the maximum time (in minutes) for bulb shooting.
Custom Menu 1
f
#
CUSTOM
#
X-SYNC.
You can set the shutter speed that will be used when the flash fires. The speed can be set from
1/60 to 1/250 in 1/3 EV increments.
•
For details on the synchronization speed of commercially available flashes, refer to their manuals.
#
SLOW LIMIT
You can set the slow limit of the shutter speed that will be used when the flash fires. The speed
can be set from 1/30 to 1/250 in 1/3 EV increments.
w
+
F
When set to
[ON]
, it will be added to the exposure compensation value and flash intensity
control will be performed.
To Next Page
Loading...
