72
EN
5
Record mode, white balance, and picture mode
You can select image tone to create unique image effects. You can also fine-adjust image
parameters such as contrast and sharpness for each mode. The adjusted parameters are
recorded in each picture effect mode.
[
h
VIVID]
: Produces vivid colors.
[
i
NATURAL]
: Produces natural colors.
[
j
MUTED]
: Produces flat tones.
[
Z
PORTRAIT]
: Produces beautiful skin tones.
[MONOTONE]
: Produces black and white tone.
[CUSTOM]
: Select one picture mode, set the parameters, and register the setting. You
can also register the gradation to
[CUSTOM]
. This setting is set separately
from
[GRADATION]
in the menu.
g
“Gradation” (P. 73)
The adjustable parameters are classified according to the
picture modes.
The individual parameters are as follows.
[CONTRAST]
: Distinction between light and dark
[SHARPNESS]
: Sharpness of the image
[SATURATION]
: Vividness of the color
[B&W FILTER]
: Creates a black and white image. The
filter color is brightened and the
complementary color is darkened.
[N: NEUTRAL]
: Creates a normal black and
white image.
[Ye: YELLOW]
: Reproduces clearly defined
white cloud with natural blue
sky.
[Or: ORANGE]
: Slightly emphasizes colors in blue skies and sunsets.
[R: RED]
: Strongly emphasizes colors in blue skies and brightness of crimson
foliage.
[G: GREEN]
: Strongly emphasizes colors in red lips and green leaves.
[PICT. TONE]
: Colors the black and white image.
[N: NEUTRAL]
: Creates a normal black and
white image.
[S: SEPIA]
:Sepia
[B: BLUE]
:Bluish
[P: PURPLE]
: Purplish
[G: GREEN]
: Greenish
Picture mode
Super control panel
ip
: [PICTURE MODE]
Menu
MENU
[
W
]
[PICTURE MODE]
CARD SETUP
CUSTOM RESET
PICTURE MODE
GRADATION
WB
CANCEL SELECT
GO
PICTURE MODE
j
MUTED
i
NATURAL
Z
PORTRAIT
MONOTONE
h
VIVID
CONTRAST
SHARPNESS
SATURATION
i
NATURAL
CANCEL SELECT
GO
Lo Hi
Lo Hi
Lo
Hi
Lo
00
Hi
CONTRAST
CANCEL SELECT
GO
To Next Page
Loading...
