119
EN
Using the OLYMPUS Master software
10
1
Click the “Album” tab on the browse window and select
the album that you want to view.
•
The selected album image is displayed in the thumbnail area.
2
Double-click the still picture thumbnail that you want to
view.
•
OLYMPUS Master switches to the image edit window and the
picture is enlarged.
•
Click “Back” to return to the browse window.
Please take care that your battery is fully charged!
1
Make sure that your computer is connected to the Internet.
2
Plug the USB cable into the USB port on the computer.
3
Plug the other end of the USB cable into the camera’s USB connector.
•
The camera turns on automatically.
•
The monitor turns on and the selection screen for the USB connection is displayed.
4
Select [STORAGE] and press the
i
button.
5
In the browse window, select “Camera”, then “Update Camera / Add Display
Language”.
•
The confirmation window for updating is displayed.
6
Click “OK”.
•
The updating the camera window is displayed.
7
Click “Add Language” in the updating
camera display.
•
The “Add Display Language of Camera” window
is displayed.
Viewing still images
To increase the number of languages
To Next Page
Loading...
